SUN, Yibo ;YANG, Xinhua . Study on the Correction of S-N Distribution in the Welding Fatigue Analysis Method Based on the Battelle Equivalent Structural Stress by Rough Set Theory. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 60, n.9, p. 600-606, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/study-on-the-correction-of-s-n-distribution-in-the-welding-fatigue-analysis-method-based-on-the-battelle-equivalent-structural-stress-by-rough-set-theory/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2013.1579.
Sun, Y., & Yang, X. (2014). Study on the Correction of S-N Distribution in the Welding Fatigue Analysis Method Based on the Battelle Equivalent Structural Stress by Rough Set Theory. Strojniški vestnik - Journal of Mechanical Engineering, 60(9), 600-606. doi:http://dx.doi.org/10.5545/sv-jme.2013.1579
@article{sv-jmesv-jme.2013.1579, author = {Yibo Sun and Xinhua Yang}, title = {Study on the Correction of S-N Distribution in the Welding Fatigue Analysis Method Based on the Battelle Equivalent Structural Stress by Rough Set Theory}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {60}, number = {9}, year = {2014}, keywords = {Welding; fatigue; Battelle structural stress; Master S-N curve method; Correction; S-N distribution}, abstract = {In welding techniques, failure is a key problem that is related to the stability and safety of the welded structure. In the commonly used welding fatigue analysis methods, the Master S-N curve method based on Battelle structural stress solves the problem of inconsistencies in stress calculation and S-N curve selection better than the nominal stress method and hot spot stress method. In this paper, rough set theory was employed to study the S-N distribution based on the Battelle equivalent structural stress. Firstly, rough set analyses of the S-N distribution based on the nominal stress, structure stress and Battelle equivalent structure stress were carried out. Then the S-N distributions based on the three stresses were studied. The results indicated that structural stress rearranges the S-N point making it much more concentrated in the region near the mean S-N curve and that equivalent structural stress places the S-N point more uniformly on both sides of the curve. Subsequently, the corrections from the plate thickness and stress ratio in the Master S-N curve method were studied. It was concluded that with two steps of corrections the decision-making degrees of welding factors are weakened and harmonized in the Battelle equivalent structural stress. This made the S-N distribution much more concentrated and uniform, which allows more accurate welding fatigue prediction by the Master S-N curve.}, issn = {0039-2480}, pages = {600-606}, doi = {10.5545/sv-jme.2013.1579}, url = {https://www.sv-jme.eu/article/study-on-the-correction-of-s-n-distribution-in-the-welding-fatigue-analysis-method-based-on-the-battelle-equivalent-structural-stress-by-rough-set-theory/} }
Sun, Y.,Yang, X. 2014 June 60. Study on the Correction of S-N Distribution in the Welding Fatigue Analysis Method Based on the Battelle Equivalent Structural Stress by Rough Set Theory. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 60:9
%A Sun, Yibo %A Yang, Xinhua %D 2014 %T Study on the Correction of S-N Distribution in the Welding Fatigue Analysis Method Based on the Battelle Equivalent Structural Stress by Rough Set Theory %B 2014 %9 Welding; fatigue; Battelle structural stress; Master S-N curve method; Correction; S-N distribution %! Study on the Correction of S-N Distribution in the Welding Fatigue Analysis Method Based on the Battelle Equivalent Structural Stress by Rough Set Theory %K Welding; fatigue; Battelle structural stress; Master S-N curve method; Correction; S-N distribution %X In welding techniques, failure is a key problem that is related to the stability and safety of the welded structure. In the commonly used welding fatigue analysis methods, the Master S-N curve method based on Battelle structural stress solves the problem of inconsistencies in stress calculation and S-N curve selection better than the nominal stress method and hot spot stress method. In this paper, rough set theory was employed to study the S-N distribution based on the Battelle equivalent structural stress. Firstly, rough set analyses of the S-N distribution based on the nominal stress, structure stress and Battelle equivalent structure stress were carried out. Then the S-N distributions based on the three stresses were studied. The results indicated that structural stress rearranges the S-N point making it much more concentrated in the region near the mean S-N curve and that equivalent structural stress places the S-N point more uniformly on both sides of the curve. Subsequently, the corrections from the plate thickness and stress ratio in the Master S-N curve method were studied. It was concluded that with two steps of corrections the decision-making degrees of welding factors are weakened and harmonized in the Battelle equivalent structural stress. This made the S-N distribution much more concentrated and uniform, which allows more accurate welding fatigue prediction by the Master S-N curve. %U https://www.sv-jme.eu/article/study-on-the-correction-of-s-n-distribution-in-the-welding-fatigue-analysis-method-based-on-the-battelle-equivalent-structural-stress-by-rough-set-theory/ %0 Journal Article %R 10.5545/sv-jme.2013.1579 %& 600 %P 7 %J Strojniški vestnik - Journal of Mechanical Engineering %V 60 %N 9 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Sun, Yibo, & Xinhua Yang. "Study on the Correction of S-N Distribution in the Welding Fatigue Analysis Method Based on the Battelle Equivalent Structural Stress by Rough Set Theory." Strojniški vestnik - Journal of Mechanical Engineering [Online], 60.9 (2014): 600-606. Web. 01 Sep. 2024
TY - JOUR AU - Sun, Yibo AU - Yang, Xinhua PY - 2014 TI - Study on the Correction of S-N Distribution in the Welding Fatigue Analysis Method Based on the Battelle Equivalent Structural Stress by Rough Set Theory JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2013.1579 KW - Welding; fatigue; Battelle structural stress; Master S-N curve method; Correction; S-N distribution N2 - In welding techniques, failure is a key problem that is related to the stability and safety of the welded structure. In the commonly used welding fatigue analysis methods, the Master S-N curve method based on Battelle structural stress solves the problem of inconsistencies in stress calculation and S-N curve selection better than the nominal stress method and hot spot stress method. In this paper, rough set theory was employed to study the S-N distribution based on the Battelle equivalent structural stress. Firstly, rough set analyses of the S-N distribution based on the nominal stress, structure stress and Battelle equivalent structure stress were carried out. Then the S-N distributions based on the three stresses were studied. The results indicated that structural stress rearranges the S-N point making it much more concentrated in the region near the mean S-N curve and that equivalent structural stress places the S-N point more uniformly on both sides of the curve. Subsequently, the corrections from the plate thickness and stress ratio in the Master S-N curve method were studied. It was concluded that with two steps of corrections the decision-making degrees of welding factors are weakened and harmonized in the Battelle equivalent structural stress. This made the S-N distribution much more concentrated and uniform, which allows more accurate welding fatigue prediction by the Master S-N curve. UR - https://www.sv-jme.eu/article/study-on-the-correction-of-s-n-distribution-in-the-welding-fatigue-analysis-method-based-on-the-battelle-equivalent-structural-stress-by-rough-set-theory/
@article{{sv-jme}{sv-jme.2013.1579}, author = {Sun, Y., Yang, X.}, title = {Study on the Correction of S-N Distribution in the Welding Fatigue Analysis Method Based on the Battelle Equivalent Structural Stress by Rough Set Theory}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {60}, number = {9}, year = {2014}, doi = {10.5545/sv-jme.2013.1579}, url = {https://www.sv-jme.eu/article/study-on-the-correction-of-s-n-distribution-in-the-welding-fatigue-analysis-method-based-on-the-battelle-equivalent-structural-stress-by-rough-set-theory/} }
TY - JOUR AU - Sun, Yibo AU - Yang, Xinhua PY - 2018/06/28 TI - Study on the Correction of S-N Distribution in the Welding Fatigue Analysis Method Based on the Battelle Equivalent Structural Stress by Rough Set Theory JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 60, No 9 (2014): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2013.1579 KW - Welding, fatigue, Battelle structural stress, Master S-N curve method, Correction, S-N distribution N2 - In welding techniques, failure is a key problem that is related to the stability and safety of the welded structure. In the commonly used welding fatigue analysis methods, the Master S-N curve method based on Battelle structural stress solves the problem of inconsistencies in stress calculation and S-N curve selection better than the nominal stress method and hot spot stress method. In this paper, rough set theory was employed to study the S-N distribution based on the Battelle equivalent structural stress. Firstly, rough set analyses of the S-N distribution based on the nominal stress, structure stress and Battelle equivalent structure stress were carried out. Then the S-N distributions based on the three stresses were studied. The results indicated that structural stress rearranges the S-N point making it much more concentrated in the region near the mean S-N curve and that equivalent structural stress places the S-N point more uniformly on both sides of the curve. Subsequently, the corrections from the plate thickness and stress ratio in the Master S-N curve method were studied. It was concluded that with two steps of corrections the decision-making degrees of welding factors are weakened and harmonized in the Battelle equivalent structural stress. This made the S-N distribution much more concentrated and uniform, which allows more accurate welding fatigue prediction by the Master S-N curve. UR - https://www.sv-jme.eu/article/study-on-the-correction-of-s-n-distribution-in-the-welding-fatigue-analysis-method-based-on-the-battelle-equivalent-structural-stress-by-rough-set-theory/
Sun, Yibo, AND Yang, Xinhua. "Study on the Correction of S-N Distribution in the Welding Fatigue Analysis Method Based on the Battelle Equivalent Structural Stress by Rough Set Theory" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 60 Number 9 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 60(2014)9, 600-606
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
In welding techniques, failure is a key problem that is related to the stability and safety of the welded structure. In the commonly used welding fatigue analysis methods, the Master S-N curve method based on Battelle structural stress solves the problem of inconsistencies in stress calculation and S-N curve selection better than the nominal stress method and hot spot stress method. In this paper, rough set theory was employed to study the S-N distribution based on the Battelle equivalent structural stress. Firstly, rough set analyses of the S-N distribution based on the nominal stress, structure stress and Battelle equivalent structure stress were carried out. Then the S-N distributions based on the three stresses were studied. The results indicated that structural stress rearranges the S-N point making it much more concentrated in the region near the mean S-N curve and that equivalent structural stress places the S-N point more uniformly on both sides of the curve. Subsequently, the corrections from the plate thickness and stress ratio in the Master S-N curve method were studied. It was concluded that with two steps of corrections the decision-making degrees of welding factors are weakened and harmonized in the Battelle equivalent structural stress. This made the S-N distribution much more concentrated and uniform, which allows more accurate welding fatigue prediction by the Master S-N curve.