GOV, Kursad ;EYERCIOGLU, Omer ;CAKIR, Veysel Mehmed. Hardness Effects on Abrasive Flow Machining. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 59, n.10, p. 626-631, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/hardness-effects-on-abrasive-flow-machining/>. Date accessed: 20 dec. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2013.1129.
Gov, K., Eyercioglu, O., & Cakir, V. (2013). Hardness Effects on Abrasive Flow Machining. Strojniški vestnik - Journal of Mechanical Engineering, 59(10), 626-631. doi:http://dx.doi.org/10.5545/sv-jme.2013.1129
@article{sv-jmesv-jme.2013.1129,
author = {Kursad Gov and Omer Eyercioglu and Veysel Mehmed Cakir},
title = {Hardness Effects on Abrasive Flow Machining},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {59},
number = {10},
year = {2013},
keywords = {Abrasive Flow Machining; Surface Roughness; WEDM},
abstract = {Abrasive flow machining (AFM) is a manufacturing technique that uses the flow of a pressurized abrasive media to remove workpiece material. In comparison with other polishing technique, AFM is very efficient, suitable for the finishing of complex inner surfaces. In this paper, the effect of workpiece hardness on the AFM process has been investigated. An experimental study was carried out on AISI D2 tool steel hardened to 31, 45 and 55 HRC. The specimens were cut by using wire electro discharge machining (WEDM) and then finished with AFM. The results show that the white layer formed during WEDM is successfully removed by AFM in a few cycles. Although the surface quality is improved by AFM for all hardness groups, the results show that harder materials have more surface improvement than the softer ones.},
issn = {0039-2480}, pages = {626-631}, doi = {10.5545/sv-jme.2013.1129},
url = {https://www.sv-jme.eu/article/hardness-effects-on-abrasive-flow-machining/}
}
Gov, K.,Eyercioglu, O.,Cakir, V. 2013 June 59. Hardness Effects on Abrasive Flow Machining. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 59:10
%A Gov, Kursad %A Eyercioglu, Omer %A Cakir, Veysel Mehmed %D 2013 %T Hardness Effects on Abrasive Flow Machining %B 2013 %9 Abrasive Flow Machining; Surface Roughness; WEDM %! Hardness Effects on Abrasive Flow Machining %K Abrasive Flow Machining; Surface Roughness; WEDM %X Abrasive flow machining (AFM) is a manufacturing technique that uses the flow of a pressurized abrasive media to remove workpiece material. In comparison with other polishing technique, AFM is very efficient, suitable for the finishing of complex inner surfaces. In this paper, the effect of workpiece hardness on the AFM process has been investigated. An experimental study was carried out on AISI D2 tool steel hardened to 31, 45 and 55 HRC. The specimens were cut by using wire electro discharge machining (WEDM) and then finished with AFM. The results show that the white layer formed during WEDM is successfully removed by AFM in a few cycles. Although the surface quality is improved by AFM for all hardness groups, the results show that harder materials have more surface improvement than the softer ones. %U https://www.sv-jme.eu/article/hardness-effects-on-abrasive-flow-machining/ %0 Journal Article %R 10.5545/sv-jme.2013.1129 %& 626 %P 6 %J Strojniški vestnik - Journal of Mechanical Engineering %V 59 %N 10 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Gov, Kursad, Omer Eyercioglu, & Veysel Mehmed Cakir. "Hardness Effects on Abrasive Flow Machining." Strojniški vestnik - Journal of Mechanical Engineering [Online], 59.10 (2013): 626-631. Web. 20 Dec. 2024
TY - JOUR AU - Gov, Kursad AU - Eyercioglu, Omer AU - Cakir, Veysel Mehmed PY - 2013 TI - Hardness Effects on Abrasive Flow Machining JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2013.1129 KW - Abrasive Flow Machining; Surface Roughness; WEDM N2 - Abrasive flow machining (AFM) is a manufacturing technique that uses the flow of a pressurized abrasive media to remove workpiece material. In comparison with other polishing technique, AFM is very efficient, suitable for the finishing of complex inner surfaces. In this paper, the effect of workpiece hardness on the AFM process has been investigated. An experimental study was carried out on AISI D2 tool steel hardened to 31, 45 and 55 HRC. The specimens were cut by using wire electro discharge machining (WEDM) and then finished with AFM. The results show that the white layer formed during WEDM is successfully removed by AFM in a few cycles. Although the surface quality is improved by AFM for all hardness groups, the results show that harder materials have more surface improvement than the softer ones. UR - https://www.sv-jme.eu/article/hardness-effects-on-abrasive-flow-machining/
@article{{sv-jme}{sv-jme.2013.1129},
author = {Gov, K., Eyercioglu, O., Cakir, V.},
title = {Hardness Effects on Abrasive Flow Machining},
journal = {Strojniški vestnik - Journal of Mechanical Engineering},
volume = {59},
number = {10},
year = {2013},
doi = {10.5545/sv-jme.2013.1129},
url = {https://www.sv-jme.eu/article/hardness-effects-on-abrasive-flow-machining/}
}
TY - JOUR AU - Gov, Kursad AU - Eyercioglu, Omer AU - Cakir, Veysel Mehmed PY - 2018/06/28 TI - Hardness Effects on Abrasive Flow Machining JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 59, No 10 (2013): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2013.1129 KW - Abrasive Flow Machining, Surface Roughness, WEDM N2 - Abrasive flow machining (AFM) is a manufacturing technique that uses the flow of a pressurized abrasive media to remove workpiece material. In comparison with other polishing technique, AFM is very efficient, suitable for the finishing of complex inner surfaces. In this paper, the effect of workpiece hardness on the AFM process has been investigated. An experimental study was carried out on AISI D2 tool steel hardened to 31, 45 and 55 HRC. The specimens were cut by using wire electro discharge machining (WEDM) and then finished with AFM. The results show that the white layer formed during WEDM is successfully removed by AFM in a few cycles. Although the surface quality is improved by AFM for all hardness groups, the results show that harder materials have more surface improvement than the softer ones. UR - https://www.sv-jme.eu/article/hardness-effects-on-abrasive-flow-machining/
Gov, Kursad, Eyercioglu, Omer, AND Cakir, Veysel. "Hardness Effects on Abrasive Flow Machining" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 59 Number 10 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 59(2013)10, 626-631
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
Abrasive flow machining (AFM) is a manufacturing technique that uses the flow of a pressurized abrasive media to remove workpiece material. In comparison with other polishing technique, AFM is very efficient, suitable for the finishing of complex inner surfaces. In this paper, the effect of workpiece hardness on the AFM process has been investigated. An experimental study was carried out on AISI D2 tool steel hardened to 31, 45 and 55 HRC. The specimens were cut by using wire electro discharge machining (WEDM) and then finished with AFM. The results show that the white layer formed during WEDM is successfully removed by AFM in a few cycles. Although the surface quality is improved by AFM for all hardness groups, the results show that harder materials have more surface improvement than the softer ones.