OKUTAN, Eda ;KARABAY, Sedat ;SINMAZÇELIK, Tamer ;AVCU, Egemen . A Study on Derivation of Parametric Cutting Force Equations In Drilling of GFRP Composites. Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 59, n.2, p. 97-105, june 2018. ISSN 0039-2480. Available at: <https://www.sv-jme.eu/article/a-study-on-derivation-of-parametric-cutting-force-equations-in-drilling-of-gfrp-composites/>. Date accessed: 01 sep. 2024. doi:http://dx.doi.org/10.5545/sv-jme.2012.774.
Okutan, E., Karabay, S., Sınmazçelik, T., & Avcu, E. (2013). A Study on Derivation of Parametric Cutting Force Equations In Drilling of GFRP Composites. Strojniški vestnik - Journal of Mechanical Engineering, 59(2), 97-105. doi:http://dx.doi.org/10.5545/sv-jme.2012.774
@article{sv-jmesv-jme.2012.774, author = {Eda Okutan and Sedat Karabay and Tamer Sınmazçelik and Egemen Avcu}, title = {A Study on Derivation of Parametric Cutting Force Equations In Drilling of GFRP Composites}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {59}, number = {2}, year = {2013}, keywords = {GFRP, Machinability, Surface morphology, Thrust force, Drill torque, Empirical equation}, abstract = {In this present work, it is aimed to derivate machine force equations in drilling of [0°/+45°/90°/–45°] oriented glass fiber reinforced polymeric matrix composites (GFRP). Machining was performed on the GFRP samples using 118° point angle drills in dry conditions. During machining, drill torques and thrust force fluctuations were recorded with dynamometer–amplifier–computer combination at different feed rates and drill diameters. Subsequently, collected data were appreciated using mathematical model to investigate empirical relations between essential parameters. Subsequently, cutting forces on drilling of GFRP materials were calculated by investigated empirical equations and then results were compared with measured data to indicate verification of the derived equations on drilling of glass fiber reinforced polymeric matrix materials. Moreover, hole surface morphology of drilled GFRP samples were examined by using magnifying under optical microscope and scanning electron microscope (SEM).}, issn = {0039-2480}, pages = {97-105}, doi = {10.5545/sv-jme.2012.774}, url = {https://www.sv-jme.eu/article/a-study-on-derivation-of-parametric-cutting-force-equations-in-drilling-of-gfrp-composites/} }
Okutan, E.,Karabay, S.,Sınmazçelik, T.,Avcu, E. 2013 June 59. A Study on Derivation of Parametric Cutting Force Equations In Drilling of GFRP Composites. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 59:2
%A Okutan, Eda %A Karabay, Sedat %A Sınmazçelik, Tamer %A Avcu, Egemen %D 2013 %T A Study on Derivation of Parametric Cutting Force Equations In Drilling of GFRP Composites %B 2013 %9 GFRP, Machinability, Surface morphology, Thrust force, Drill torque, Empirical equation %! A Study on Derivation of Parametric Cutting Force Equations In Drilling of GFRP Composites %K GFRP, Machinability, Surface morphology, Thrust force, Drill torque, Empirical equation %X In this present work, it is aimed to derivate machine force equations in drilling of [0°/+45°/90°/–45°] oriented glass fiber reinforced polymeric matrix composites (GFRP). Machining was performed on the GFRP samples using 118° point angle drills in dry conditions. During machining, drill torques and thrust force fluctuations were recorded with dynamometer–amplifier–computer combination at different feed rates and drill diameters. Subsequently, collected data were appreciated using mathematical model to investigate empirical relations between essential parameters. Subsequently, cutting forces on drilling of GFRP materials were calculated by investigated empirical equations and then results were compared with measured data to indicate verification of the derived equations on drilling of glass fiber reinforced polymeric matrix materials. Moreover, hole surface morphology of drilled GFRP samples were examined by using magnifying under optical microscope and scanning electron microscope (SEM). %U https://www.sv-jme.eu/article/a-study-on-derivation-of-parametric-cutting-force-equations-in-drilling-of-gfrp-composites/ %0 Journal Article %R 10.5545/sv-jme.2012.774 %& 97 %P 9 %J Strojniški vestnik - Journal of Mechanical Engineering %V 59 %N 2 %@ 0039-2480 %8 2018-06-28 %7 2018-06-28
Okutan, Eda, Sedat Karabay, Tamer Sınmazçelik, & Egemen Avcu. "A Study on Derivation of Parametric Cutting Force Equations In Drilling of GFRP Composites." Strojniški vestnik - Journal of Mechanical Engineering [Online], 59.2 (2013): 97-105. Web. 01 Sep. 2024
TY - JOUR AU - Okutan, Eda AU - Karabay, Sedat AU - Sınmazçelik, Tamer AU - Avcu, Egemen PY - 2013 TI - A Study on Derivation of Parametric Cutting Force Equations In Drilling of GFRP Composites JF - Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2012.774 KW - GFRP, Machinability, Surface morphology, Thrust force, Drill torque, Empirical equation N2 - In this present work, it is aimed to derivate machine force equations in drilling of [0°/+45°/90°/–45°] oriented glass fiber reinforced polymeric matrix composites (GFRP). Machining was performed on the GFRP samples using 118° point angle drills in dry conditions. During machining, drill torques and thrust force fluctuations were recorded with dynamometer–amplifier–computer combination at different feed rates and drill diameters. Subsequently, collected data were appreciated using mathematical model to investigate empirical relations between essential parameters. Subsequently, cutting forces on drilling of GFRP materials were calculated by investigated empirical equations and then results were compared with measured data to indicate verification of the derived equations on drilling of glass fiber reinforced polymeric matrix materials. Moreover, hole surface morphology of drilled GFRP samples were examined by using magnifying under optical microscope and scanning electron microscope (SEM). UR - https://www.sv-jme.eu/article/a-study-on-derivation-of-parametric-cutting-force-equations-in-drilling-of-gfrp-composites/
@article{{sv-jme}{sv-jme.2012.774}, author = {Okutan, E., Karabay, S., Sınmazçelik, T., Avcu, E.}, title = {A Study on Derivation of Parametric Cutting Force Equations In Drilling of GFRP Composites}, journal = {Strojniški vestnik - Journal of Mechanical Engineering}, volume = {59}, number = {2}, year = {2013}, doi = {10.5545/sv-jme.2012.774}, url = {https://www.sv-jme.eu/article/a-study-on-derivation-of-parametric-cutting-force-equations-in-drilling-of-gfrp-composites/} }
TY - JOUR AU - Okutan, Eda AU - Karabay, Sedat AU - Sınmazçelik, Tamer AU - Avcu, Egemen PY - 2018/06/28 TI - A Study on Derivation of Parametric Cutting Force Equations In Drilling of GFRP Composites JF - Strojniški vestnik - Journal of Mechanical Engineering; Vol 59, No 2 (2013): Strojniški vestnik - Journal of Mechanical Engineering DO - 10.5545/sv-jme.2012.774 KW - GFRP, Machinability, Surface morphology, Thrust force, Drill torque, Empirical equation N2 - In this present work, it is aimed to derivate machine force equations in drilling of [0°/+45°/90°/–45°] oriented glass fiber reinforced polymeric matrix composites (GFRP). Machining was performed on the GFRP samples using 118° point angle drills in dry conditions. During machining, drill torques and thrust force fluctuations were recorded with dynamometer–amplifier–computer combination at different feed rates and drill diameters. Subsequently, collected data were appreciated using mathematical model to investigate empirical relations between essential parameters. Subsequently, cutting forces on drilling of GFRP materials were calculated by investigated empirical equations and then results were compared with measured data to indicate verification of the derived equations on drilling of glass fiber reinforced polymeric matrix materials. Moreover, hole surface morphology of drilled GFRP samples were examined by using magnifying under optical microscope and scanning electron microscope (SEM). UR - https://www.sv-jme.eu/article/a-study-on-derivation-of-parametric-cutting-force-equations-in-drilling-of-gfrp-composites/
Okutan, Eda, Karabay, Sedat, Sınmazçelik, Tamer, AND Avcu, Egemen. "A Study on Derivation of Parametric Cutting Force Equations In Drilling of GFRP Composites" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 59 Number 2 (28 June 2018)
Strojniški vestnik - Journal of Mechanical Engineering 59(2013)2, 97-105
© The Authors, CC-BY 4.0 Int. Change in copyright policy from 2022, Jan 1st.
In this present work, it is aimed to derivate machine force equations in drilling of [0°/+45°/90°/–45°] oriented glass fiber reinforced polymeric matrix composites (GFRP). Machining was performed on the GFRP samples using 118° point angle drills in dry conditions. During machining, drill torques and thrust force fluctuations were recorded with dynamometer–amplifier–computer combination at different feed rates and drill diameters. Subsequently, collected data were appreciated using mathematical model to investigate empirical relations between essential parameters. Subsequently, cutting forces on drilling of GFRP materials were calculated by investigated empirical equations and then results were compared with measured data to indicate verification of the derived equations on drilling of glass fiber reinforced polymeric matrix materials. Moreover, hole surface morphology of drilled GFRP samples were examined by using magnifying under optical microscope and scanning electron microscope (SEM).